+86-13725088886  sales@olinktek.com

ABOUT US

Founded in 2015, Huizhou Olink Technology Co., Ltd. is a manufacturing enterprise specializing in FPC, PCB, rigid-flexible bonding board niche. Since its establishment, the company has been committed to providing supporting services for high-tech electronic enterprises and scientific research units at home and abroad, and its products are widely used in many fields such as communication, new energy vehicles, medical electronics, industrial control, semiconductors and so on. Now the company has more than 200 employees, plant area of more than 8000 square meters, monthly production capacity of 2...

VIEW ALL

BLOG


  • 2021-08-23

    pcb multilayer board manufacturer design over hole considerations

    The most important design of the production of multilayer PCB circuit board is the design of the hole and line alignment design, on the current PCB multilayer board mostly used in communications, medical and other fields, multilayer board manufacture...


  • 2021-08-16

    Difference between multi-layer circuit boards and double-sided boards

    What is a double-sided PCB? Double-sided boards have wiring on both sides, but in order to use the wires on both sides, there must be a proper circuit connection between the two sides, and this bridge between the circuits is called a guide hole. Guid...


  • 2021-08-12

    Note on pcb outsourcing processing

    Wires: 1. Minimum line spacing: 6mil (0.153mm). Minimum line spacing, that is, the line to line, line to pad distance of not less than 6mil from the production point of view, is the greater the better, generally in the conventional 10mil, of course,...


  • 2021-08-10

    pcb four layer circuit board preservation time has how long

    pcb four-layer circuit board preservation time how long four-layer board concept Four-layer board (4 layers) refers to the circuit printed circuit board PCB Printed Circuit Board made of 4 layers of glass fiber, which can reduce the cost of PCB but t...


  • 2021-08-05

    The difference between pcb double-layer board and four-layer board

    Custom circuit board double-sided four layers is the most common, including double-sided board applications are the most extensive, four-layer board followed by the pcb double-layer board and four-layer board with the naked eye is unable to identify,...


  • 2021-08-03

    Analysis of the causes of damage to printed circuit boards

    With extended use, printed circuit boards can encounter a variety of problems. From damaged alignments that affect the conductivity of the board and circuit to component failures where capacitors or diodes are about to disappear, there are many point...


  • 2021-08-02

    Notes on pcb drilling production

    pcb drilling is the primary link in the printed circuit board, different layers of circuit board conductive graphics between the copper foil line is to use this hole to guide or connect up, but can not be inserted into the component legs or other enh...


  • 2021-07-30

    Common faults caused by moisture on circuit boards

    Common faults caused by moisture in circuit boards, due to changes in circuit parameters of the circuit board and lead to circuit board failure. Circuit boards in the circuit board is in a short circuit state, resulting in circuit board failure, sign...


  • 2021-07-29

    pcb circuit board processing process may cause the board surface quality is bad in which 4 kinds of situations?

    1, the problem of substrate technology processing: especially for some thinner substrates (generally below 0.8mm), because the substrate is less rigid, it is not appropriate to use the brush board machine to brush the board. This may not be able to e...


  • 2021-07-27

    pcb Frequently Asked Questions

    I. Pad overlap 1. Overlapping of pads (except surface pads) means overlapping of holes, which will lead to drill breakage and hole damage due to multiple drilling in one location during drilling. 2. Overlap of two holes on a multilayer board. For exa...



document.write ('');